Gallery
Our gallery shows examples of different system integration projects we have taken on.
System Integration services are used by many different industries for a variety of problem solving solutions.
Our case studies reveal more in-depth details regarding some of the work we have taken on over the years.
Vision Inspection HMI Screen
This screen shows the defects (red border). These defect are rejected later in the prosess
Food Jar Vision Inspection
This system check for label, tamper seal & date code presence. Any failures are automatically rejected
Sick Ultrasonic Transmitter
Used to monitor and fill liquid PVC tank. Can achieve a standard deviation of 0.1mm
Control Panel Commissioning
Installation & commissioning of large roof top chiller system for cooling chocolate biscuit packing line
Twin Pack Flow Wrapper Upgrade
System included automated 90 degree infeed
CIP Control Panel
System included Citech SCADA PC, B&R PLC & Yaskawa inverters
Mixer Control Panel
System Included Allen Bradley PLC & Inverters
Electrical & Pneumatic Design
We use Eplan for our electrical & pneumatic schematics.
Machine Upgrade Installation
We can carry out new machine builds or retrofits of exisitng systems
Panel Build
All the control panel builds are designed and built inhouse at Adbro. We can build panels to clients design if required
Ball Mill System Upgrade
Upgrade included control system and safety devices
SCADA Screen
Wonderware Intouch SCADA screen
Clamp Vision Inspection System
Vision inspection system for turbo clamps.
Inverters
We have experience in a wide range of vendor inverters
Roof Top Chiiller Main Control System
PVC Hot Dip Control System
Generator Control System Upgrade
This was for five 1MVA generators and included syncronisation and G59
Indexed 3D Vision System
Installed in France to monitor the shape of the BN biscuit
Vision Based Gap Measurement
Vision Based Machine Collision Detection
This system monitors the infeed to a 350 tonne press to prevent any collisions
Plant Relocation
Process plant being removed from the first floor during a relocation project
Car Chassis Part Presence Detection
Checks for the presence and correct location on a section of a car chassis
3D Broken Biscuit Detection
Safety Laser Scanner
Enables a safe zone without the need for guarding
Palletiser Control Panel
This system used Allen Bradley PLCs. Parker ACR9000 motion controller and Parker Aries servo drives
Dual Redundant UPS System (8hrs +)
Motion Controlled Vision Inspection
Used to monitor the shape of the McVities Hob Nobs bars
Vision Colour Detection @ 1 m/s
Palletiser Retrofit
Retrofit consisted of control system upgrade and mechanical service
Bottle Vision Inspection System
Used to detect the integrity of the tamper seal. Bottle sample rate was 6 bottles per second
Onsite Support
Fault investigation on a Rotorq valve
Mechanical Design
We use various software packages for our mechanical design include 3D packages such as Fusion 360
Trunion Insert Machine Build
Programmable Safety Relay
Installation In Action
Vision System Status Screen
Hot Standby PLC & Network System
Food Jar Vision Inspection System
This system check for label, tamper seal & date code presence. Any failures are automatically rejected
Batch Control Using Standard Scales
Continuous Oven Retrofit
This included temperature, damper & burner control
Vision System User Setup Screen
Twin Pack Flow Wrapper Infeed
Turbo Clamp Vision Inspection
Trunnion Insert System
This machine (designed and built by Adbro) insert trunnions into part formmed turbo clamps
